3com 5500-ei pwr Guia De Referência

 

1-3 

 

When you use the dldp enable/dldp disable command in system view to enable/disable DLDP on all 

optical ports of the switch, the configuration takes effect on the existing optical ports, instead of those 

added subsequently. 

 

# Enable DLDP on all optical ports of the switch. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] dldp enable 

# Enable DLDP on fiber-optic port GigabitEthernet 1/0/49. 

[Sysname] interface GigabitEthernet 1/0/49 

[Sysname-GigabitEthernet1/0/49] dldp enable 

dldp authentication-mode { none | simple simple-password | md5 md5-password } 

undo dldp authentication-mode 

System view 

none: Sets the authentication mode on the port to none (Performs no authentication on the port). 

simple: Sets the authentication mode on the port to plain text. 

simple-password: Plain text authentication password, a string in plain text consisting of 1 to 16 

characters. 

md5: Sets the authentication mode on the port to MD5. 

md5-password: MD5 authentication password, a string in plain text consisting of 1 to 16 characters or a 

string in cipher text corresponding to the string in plain text. 

Use the dldp authentication-mode command to set the DLDP authentication mode and password on 

the current port. 

Use the undo dldp authentication-mode to remove the DLDP authentication mode and password on 

the current port. 

By default, the authentication mode on the current port is none. 

Note that: