3com 5500-ei pwr Guia De Referência

 

1-5 

unidirectional links. On the contrary, if too short an interval is set, network traffic increases, 

unnecessarily consuming port bandwidth. 

# Set the interval between sending advertisement packets to 6 seconds for all DLDP-enabled ports in 

the advertisement state. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] dldp interval 6 

System view/Ethernet port view 

None 

In system view:  

Use the dldp reset command to reset the DLDP status of all the ports disabled by DLDP. 

In Ethernet port view:  

Use the dldp reset command to reset the DLDP status of the current port disabled by DLDP. 

After the dldp reset command is executed, the DLDP status of a port changes from disable to active 

and DLDP restarts to detect the link status of the fiber cable or copper twisted pair. 

Related commands: dldp and dldp unidirectional-shutdown. 

# Reset the DLDP status of all the ports disabled by DLDP. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] dldp reset 

dldp unidirectional-shutdown { auto | manual } 

undo dldp unidirectional-shutdown 

System view