3com 5500-ei pwr Guia De Referência

 

1-71 

# Set the IP address and UDP port number of the secondary accounting server for HWTACACS 
scheme hwt1 to 10.163.155.12 and 49 respectively. 

<Sysname> system-view  

System View: return to User View with Ctrl+Z. 

[Sysname] hwtacacs scheme hwt1 

[Sysname-hwtacacs-hwt1] secondary accounting 10.163.155.12 49 

 ip-address [ port ]  

  

HWTACACS scheme view 

: IP address of the secondary authentication server to be used, a valid unicast address 

in dotted decimal notation. 

: Port number of the secondary authentication server, ranging from 1 to 65535. 

Use the secondary authentication command to set the IP address and port number of the 
secondary HWTACACS authentication server to be used by the current scheme.  

Use the undo secondary authentication command to restore the default IP address and port 
number of the secondary HWTACACS authentication server, which are 0.0.0.0 and 49 
respectively. 

Note that: 

z

 

You are not allowed to set the same IP address for both primary and secondary authentication 
servers. If you do this, your setting will fail. 

z

 

If you re-execute the command, the new setting overwrites the old one. 

z

 

You can remove an authentication server setting only when there is no active TCP connection that 
is sending authentication messages to the server. 

Related commands: display hwtacacs. 

# Set the IP address and UDP port number of the secondary authentication server for 
HWTACACS scheme hwt1 to 10.163.155.13 and 49 respectively. 

<Sysname> system-view  

System View: return to User View with Ctrl+Z. 

[Sysname] hwtacacs scheme hwt1