3com 5500-ei pwr Guia De Referência

 

1-72 

[Sysname-hwtacacs-hwt1] secondary authentication 10.163.155.13 49 

secondary authorization ip-address 

[ port ]  

HWTACACS scheme view 

: IP address of the secondary authorization server, a valid unicast address in dotted 

decimal notation. 

: Port number of the secondary authorization server, ranging from 1 to 65535. 

Use the secondary authorization command to set the IP address and port number of the 
secondary HWTACACS authorization server to be used by the current scheme.  

Use the .undo secondary authorization command to restore the default IP address and port 
number of the secondary HWTACACS authorization server, which are 0.0.0.0 and 49 
respectively. 

Note that: 

z

 

You are not allowed to set the same IP address for both primary and secondary authorization 
servers. 

z

 

If you re-execute the command, the new setting will overwrite the old one. 

z

 

You can remove an authorization server setting only when there is no active TCP connection that 
is sending authorization messages to the server. 

Related commands: display hwtacacs. 

# Set the IP address and UDP port number of the secondary authorization server for HWTACACS 
scheme hwt1 to 10.163.155.13 and 49 respectively. 

<Sysname> system-view  

System View: return to User View with Ctrl+Z. 

[Sysname] hwtacacs scheme hwt1 

[Sysname-hwtacacs-hwt1] secondary authorization 10.163.155.13 49 

timer quiet minutes