3com 5500-ei pwr Guia De Referência

 

1-7 

display xrn-fabric [ port ] 

Any view 

port: Displays the fabric port information. 

Use the display xrn-fabric command to view the information of the entire fabric, including unit ID, unit 

name, and operation mode of the system. If the fabric information is displayed on the console port of a 

device, an asterisk (*) will be added to the unit ID of the current device. 

# Display fabric information on the console port of unit 1. 

<Sysname> display xrn-fabric 

Fabric name is Sysname, system mode is L3. 

Unit Name                                 Unit ID 

First                                     1(*) 

Second                                    2 

From the above example, you can see the following: 

z 

The name of the fabric is Sysname. 

z 

The system operation mode is Layer 3 forwarding. 

z 

The current device is 1 (marked by *) 

z 

The name of the current device is First (the name of a device can be configured by using the set 

unit name command) 

z 

The other unit in the fabric is numbered 2 

# Display the fabric port of the current device. 

<Sysname> display xrn-fabric port 

 

 GigabitEthernet1/0/25 

 Fabric peer: Unknown 

 Fabric Status:  Unknown 

 Fabric mode: Unknown-speed mode, Unknown-duplex mode 

 input:   0 packets, 0 bytes, 0 input errors 

 output:  7343 packets, 2250406 bytes, 0 output errors 

fabric member-auto-update software enable 

undo fabric member-auto-update software enable