3com 5500-ei pwr Guia De Referência

 

1-8 

System view 

None 

Use the fabric member-auto-update software enable command to enable the XRN automatic fabric 

function for a switch. 

Use the undo fabric member-auto-update software enable command to disable the XRN automatic 

fabric function for a switch. 

By default, the XRN automatic fabric function for a switch is disabled. 

Switch 5500-EI series switches provide the XRN automatic fabric function, which enables a candidate 

switch to automatically download the software and change the fabric name in case that the software 

version and fabric name of the candidate device and that of the device in the fabric are different, thus 

reducing the manual maintenance workload. 

 

z 

You need to enable the XRN automatic fabric function on all the devices including the candidate 

switch in the fabric to enable the candidate switch to download software and discovery neighbors 

and thus be added to the fabric normally. 

z 

If the candidate switch is going to download software from a unit in an XRN fabric, you are 

recommended to set the ID of the unit to 1 to make the candidate switch download the software of 

correct version. 

z 

Before configuring the XRN automatic fabric function, make sure that the candidate switch has 

enough Flash space to download the software. 

z 

After you configure the XRN automatic fabric function on Slave, execute the save command to 

save the configurations as soon as possible. Otherwise, the device may synchronize the 

configurations from Master and restart repeatedly because the configurations on the device are 

lost after the device automatically downloads the software and restarts. 

 

# Enable the XRN automatic fabric function for a switch. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] fabric member-auto-update software enable 

fabric save-unit-id