Gestetner dsc224 Guia De Utilização
Copying
26
2
When the
{{{{Two-color}}}} key is
selected
AAAA
Select either [Two Color] or [Red &
Black]
Black]
.
When [Red & Black] is pressed
A Press [OK].
When [Two Color] is pressed
A Press [Change Color Setting].
B Press [Black Portion], and then
B Press [Black Portion], and then
select the color to be replaced
by black.
by black.
Note
❒ When selecting a color from
the user colors, press [User
Color]
Color]
.
C Press [Non-black Portion], and
then select the color to replace
the black color of the original.
the black color of the original.
D Press [OK].
Convert Colors
Copies by changing the color in the
original to a different color.
original to a different color.
Note
❒ It is possible to specify up to 4
colors.
❒ The width of the color to be con-
verted can be adjusted in 5 levels.
If the color width is set to “Wider”
and red has been specified, colors,
which are close to magenta or or-
ange, will also be converted. The
color width can be adjusted in the
“User Tools”.
If the color width is set to “Wider”
and red has been specified, colors,
which are close to magenta or or-
ange, will also be converted. The
color width can be adjusted in the
“User Tools”.
⇒ p.106 “Color Sen-
sitivity”
AAAA
Press the
{{{{Full Color}}}} key.
BBBB
Press [Edit/Color Creation].
CCCC
Press [Color Creation].
DDDD
Press [Convert Color].
EEEE
Select the color to be converted.
FFFF
Select the new color to be converted.
Note
❒ You can adjust the density of
each color in 4 levels, excluding
white.
white.
❒ When you want to change the
converted color, press from
[Conversion 1]
[Conversion 1]
to [Conversion 4]
and make the selection again.
❒ When changing between more than
two colors, repeat steps
D and E.
UranosC1-ENcopyA_F1_FM.book Page 26 Friday, July 26, 2002 5:01 PM