Lanzar sts65bt Guia Do Utilizador

15

C. Radio Setup

Use 

 /   

buttons or tap the  corresponding

icon to select the items.
Then use 

 / 

 buttons or tap the icon  to

change the setup.
In this menu, the following operations is
permitted:
Change receive mode between DX and
Local.
Change track between Mono or Stereo.
Set REG On or Off..
Switch TA mode On or Off.
D. Time Setup

Use 

 /   

buttons or tap 

 icon to

change the items among: Year,  Month,
Day, Hour and minute.
Then use 

 /   

buttons on the remote

control or tap 

/

 to adjust the  value.

Note: When receiving RDS information,
RDS time will be displayed on the  upper
right corner, you can not adjust  RDS time
by this method.

E. System Setup

Note: In System setup menu, press  PROG
button on the remote control can  change
the wallpaper. Use 

 /    

buttons or tap

the  corresponding icon to select the
items,  Then use 

 /   

buttons on the

remote  control or tap 

/

 to change

 the setup. In this menu, you can change
Time Disp  On or Off and Switch Beep
On or Off.  Note: If you set time disp is
on, when  you turn off the unit, the current
time will  be displayed on the center of
the screen like followed.

Tap 

icon to enter screen

calibration mode. And you can see the
following picture:

Tap 

 icon firmly the icon will  continue

to move until the screen is  aligned.

In any mode, shortly press 

 /   

buttons

on the remote control to adjust the angle
of the screen step by step to get a nice

view angle. In Main Menu, tap 

/

 icon on  the right of the screen

to adjust the angle of the screen.

There is a remote sensor area on the
front panel. You can point the remote
control to the remote sensor area and
press functions keys on the remote
control to control the unit.