ONKYO dv-sp406 Guia Do Utilizador
17
Connecting the DVD player
—Continued
Hooking up the DVD player - more you can
do
A
S-Video connection (not European model)
Connect the S-VIDEO OUTPUT jack on the unit to
the corresponding input jacks on your TV using a S-
Video cable.
the corresponding input jacks on your TV using a S-
Video cable.
You will still need to connect the left and right audio
cables to the TV, or digital audio cable to your ste-
reo.
cables to the TV, or digital audio cable to your ste-
reo.
B
Component Video Connections
Connect the COMPONENT OUTPUT jacks on the
DVD player to the corresponding input jacks on your
TV using a component video cable.
DVD player to the corresponding input jacks on your
TV using a component video cable.
• You will still need to connect the left and right
audio cables to the TV, or digital audio cable to
your stereo.
your stereo.
Resolution Setting
• You can change the resolution for component
video output. Press RESOLUTION repeatedly to
select the desired resolution - 480i, 480p, 720p,
1080i, 1080p.
select the desired resolution - 480i, 480p, 720p,
1080i, 1080p.
• For 720p and 1080p resolution on the component
video output, only non-copy protected discs can
be played back. If the disc is copy proteced, it will
be displayed at the 480p resolution.
be played back. If the disc is copy proteced, it will
be displayed at the 480p resolution.
• Depending on your TV, some of the resolution set-
tings may result in the picture disappearing or an
abnormal picture appearing. In this case, press
RESOLUTION repeatedly unit the picture re-
appears.
abnormal picture appearing. In this case, press
RESOLUTION repeatedly unit the picture re-
appears.
Notes:
• Settings changed while the DVD player is On are
saved to memory when the DVD player is set to
Standby. If the DVD player’s power cord is
unplugged while the unit is still On, any changed
settings will not be saved. Be aware of this when
the DVD player is connected to a switched AC
outlet on another component.
Standby. If the DVD player’s power cord is
unplugged while the unit is still On, any changed
settings will not be saved. Be aware of this when
the DVD player is connected to a switched AC
outlet on another component.
• On the European model, if you set the TV Output
Select setting to RGB, the resolution will be fixed
at 576i (see page 22).
at 576i (see page 22).
C
SCART (European model only)
If your TV has a SCART-type AV input, you can use
a SCART cable to connect this player to your TV.
This type of connection carries both the sound and
the picture, so there’s no need to connect up the
AUDIO OUTPUT L/R and VIDEO OUTPUT jacks.
a SCART cable to connect this player to your TV.
This type of connection carries both the sound and
the picture, so there’s no need to connect up the
AUDIO OUTPUT L/R and VIDEO OUTPUT jacks.
• Use a SCART cable (not supplied) to connect the
AV CONNECTOR to an AV input on your TV.
S VIDEO IN
S VIDEO
TV
S video cable (not supplied)
COMPONENT
Y
Y
P
B
P
R
COMPONENT
VIDEO IN
VIDEO IN
P
R
P
B
TV
Component video cable
(not supplied)
(not supplied)
SCART
AV CONNECTOR
TV
SCART cable (not supplied)
DV-SP406_En.book Page 17 Friday, May 9, 2008 12:00 PM