ONKYO dv-sp406 Guia Do Utilizador

 

19

 

Connect the HDMI OUTPUT jack on the unit to the HDMI input jack on an HDMI compatible TV using an HDMI 
cable.

 

■

 

You can change the resolution for HDMI output. Press 
RESOLUTION repeatedly to select the desired resolu-
tion - 480i, 480p, 720p, 1080i, 1080p.

 

■

 

The DVD player is able to provide a 1080p full HD 
image to most 1080p-capable TVs in the market today. 
However, there are some 1080p TVs available from cer-
tain companies that are limited in the types of 1080p 
images that can be accepted.

Specifically, 1080p-capable TVs that don’t accept 
images in 60Hz can’t display an image from this DVD 
player.

 

■

 

HDMI (High Definition Multimedia Interface) supports 
both video and audio on a single digital connection for 
use with DVD Players, Set-Top Boxes, and other AV 
devices. HDMI was developed to provide the technolo-
gies of HDCP (High-bandwidth Digital Content Protec-
tion). HDCP is used to protect digital content transmitted 
and received.

HDMI has the capability to support standard, enhanced 
or high-definition video plus standard to multi-channel 
surround-sound audio, HDMI features include uncom-
pressed digital video, a bandwidth of up to 5 gigabytes 
per second, one connector (instead of several cables and 
connectors), and communication between the AV source 
and AV devices such as DTVs.

This DVD player supports HDMI version 1.1.

 

■

 

• If your TV is not capable of handling 96 kHz sampling 

frequency, set the [Sampling Freq.] option to [48 kHz] 
on the setup menu (See page 22).

• If your TV is not equipped with Dolby Digital and 

MPEG decoder, set the [Dolby Digital] and [MPEG] 
options to [PCM] on the setup menu (See page 22).

• Depending on your TV, some of the resolution settings 

may result in the picture disappearing or an abnormal 
picture appearing. In this case, press RESOLUTION 
repeatedly unit the picture re-appears.

• Changing the resolution when the DVD player is con-

nected with HDMI connector may result in malfunc-
tions. To solve the problem, turn off the unit and then 
turn it on again.

• When you connect a HDMI or DVI compatible device 

make sure of the following:

– Try switching off the HDMI/DVI device and this 

unit. Next, switch on the HDMI/DVI device and 
leave it for around 30 seconds, then switch on this 
unit.

– The connected device’s video input is set correctly 

for this unit.

– The connected device is compatible with 720x480i, 

720x480p, 1280x720p, 1920x1080i or 1920x1080p 
video input.

– The 1080p, 720p and 480p resolutions are the pro-

gressive scan applied resolution.

• Not all HDCP-compatible DVI devices will work with 

this unit.

– The picture will not be displayed properly with non-

HDCP device.

HDMI cable 
(not supplied)

DV-SP406_En.book Page 19 Friday, May 9, 2008 12:00 PM