ONKYO dv-sp406 Guia Do Utilizador

 

21

 

• Settings changed while the unit is On are saved to 

memory when the unit is set to Standby. If the unit’s 
power cord is unplugged while the unit is still On, any 
changed settings will not be saved. Be aware of this 
when the unit is connected to a switched AC outlet on 
another component.

If the language selection menu doesn’t appear, make sure 
the TV system setting (PAL, NTSC) (see page 20).

 

Select a language for the Setup menu 

and on-screen display.

 

Select a language for the 

Disc Audio/Subtitle/Menu.

 

  Refers to the original language in which 

the disc was recorded.

 

 

To select another language, press num-
ber buttons then 

 

to enter the 

corresponding 4-digit number according 
to the language code list (see page 33). 
If you make a mistake while entering 
number, press 

 

to delete num-

bers then correct it.

 

 (for Disc Subtitle)

 

Turn off Subtitle.

 

Select which screen aspect to use based on 

the shape of your TV screen.

 

 

Select when a standard 4:3 TV is con-
nected.

 

 

Select when a 16:9 wide TV is con-
nected.

 

If you selected 4:3, you’ll need to 

define how you would like widescreen programs and 
films to be displayed on your TV screen.

 

 

This displays a wide-
screen picture with black 
bands at the top and bot-
tom of the screen.

 

 

This fills the entire 4:3 
screen, cropping the pic-
ture as necessary.

 

If there’s no picture on your TV, the TV system (PAL/
NTSC) setting on the DV-SP406 may be different to 
the TV system supported by your TV.

In this case, press and hold down [

] (Pause) on the 

DV-SP406 or remote controller to switch between 
PAL and NTSC. The North American model is fixed at 
NTSC, so pressing [

] (Pause) has no effect.

DV-SP406_En.book Page 21 Friday, May 9, 2008 12:00 PM