ONKYO ht-s9300thx Manual Do Utilizador

En

You’ll need to enter a code for each component that you 
want to control.

• The remote control codes provided are correct at the time of 

printing, but are subject to change.

Onkyo components that are connected via 

u are con-

trolled by pointing the remote controller at the AV 
receiver, not the component. This allows you to control 
components that are out of view, in a rack, for example.

If you want to control an Onkyo component by pointing 
the remote controller directly at it, or you want to control 
an Onkyo component that’s not connected via 

u, use the 

following remote control codes:
• BD/DVD

`

30627: 

Onkyo DVD player without 

u

• TV/CD

`

71817: 

Onkyo CD player without 

u

`

11807: 

TV with 

p

If you want to control an Onkyo component by pointing the 
remote controller directly at it, use the following remote 
control codes:

`

32900: 

Onkyo Blu-ray Disc player

`

32901: 

Onkyo HD-DVD player

`

70868: 

Onkyo MD recorder without 

u

`

71323: 

Onkyo CD recorder without 

u

`

82990: 

Onkyo Dock without 

u

• If you connect a cassette tape deck to the TV/CD IN jack, or 

connect an RI Dock to the to the TV/CD IN or VCR/DVR IN or 
GAME IN jacks, for 

u to work properly, you must set the Input 

Display accordingly (

Look up the appropriate remote control code in 
the separate Remote Control Codes list.
The codes are organized by category (e.g., DVD 
player, TV, etc.).

you want to enter a code, press and hold down 
DISPLAY (about 3 seconds).
The remote indicator lights.

• Remote control codes cannot be entered for RECEIVER 

and ZONE 2.

• Only TV remote control codes can be entered for TV.
• Except for RECEIVER, TV and ZONE 2, remote control 

codes from any category can be entered as REMOTE 
MODE. However, these buttons also work as input selec-
tor buttons (

21), so choose a REMOTE MODE that 

corresponds with the input to which you connect your 
component. For example, if you connect your CD player 
to the CD input, choose TV/CD when entering its remote 
control code.

Within 30 seconds, use the number buttons to 
enter the 5-digit remote control code.
The remote indicator flashes twice.
If the remote control code is not entered success-
fully, the remote indicator will flash once slowly.

u

u cable and an analog audio cable 

u Components” for 

details (

Enter the appropriate remote control code for 
REMOTE MODE.
• BD/DVD

`

31612: 

Onkyo DVD player with 

u

• TV/CD

`

71327:

Onkyo CD player with 

u

`

42157:

Onkyo cassette tape deck with 

u

• PORT

`

81993: 

Onkyo Dock

See the previous section for how to enter remote 
control codes.

• When using a cassette tape deck connected via 

u, press 

and hold TV/CD to switch to TAPE.