ONKYO ht-s9300thx Manual Do Utilizador

En

You can reset a REMOTE MODE to its default remote 
control code.

You can reset the remote controller to its default settings.

By pressing REMOTE MODE that’s been programmed 
with the remote control code for your component, you can 
control your component as below.
For details on entering a remote control code for other 
components, see “Entering Remote Control Codes” 
(

TV is preprogrammed with the remote control code for 
controlling a TV that supports the 

p

*1

 (limited to 

some models). The TV must be able to receive remote 
control commands via 

p and be connected to the 

AV receiver via HDMI. If controlling your TV via 
p doesn’t work very well, program your TV’s 
remote control code into TV and use the TV remote mode 
to control your TV.

BD/DVD is preprogrammed with the remote control code 
for controlling a component that supports the 

p

*1

 

(limited to some models). The component must be able to 
receive remote control commands via 

p and be 

connected to the AV receiver via HDMI.

*1

The 

p

 supported by the 

AV receiver

 is the CEC 

system control function of the HDMI standard.

The remote indicator flashes twice, indicating that 
the button has been reset.
Each of REMOTE MODE is preprogrammed with a 
remote control code. When a button is reset, its pre-
programmed code is restored.

The remote indicator flashes twice, indicating that 
the remote controller has been reset.