ONKYO TX-8222 Manual Do Utilizador
21
Enjoying Audio Sources
SPEAKERS A/B
MASTER VOLUME
INPUT
SELECTOR
SELECTOR
/
VOLUME
Input selector buttons
1
Press the input selector button
to select the component that you
want to listen to.
to select the component that you
want to listen to.
2
Use the [SPEAKERS A] and
[SPEAKERS B] buttons on the
receiver to select the speaker set
that you want to use.
[SPEAKERS B] buttons on the
receiver to select the speaker set
that you want to use.
The A and B speaker indicators show
whether each speaker set is on or off.
whether each speaker set is on or off.
Note for TX-8522 North American
model:
model:
When you connect a set of speakers
whose impedance is 4 or 6 ohms and
output sound only from this speaker
set, the speaker impedance setting on
the receiver should be set to 6 ohms
(see page 13).
whose impedance is 4 or 6 ohms and
output sound only from this speaker
set, the speaker impedance setting on
the receiver should be set to 6 ohms
(see page 13).
3
Start playback on the selected
component.
component.
Receiver
(ex. TX-8522
North American
model)
Remote
controller
Receiver
Indicators
4
To adjust the volume, use the
receiver’s [MASTER VOLUME]
control, or the remote
controller’s VOLUME [
receiver’s [MASTER VOLUME]
control, or the remote
controller’s VOLUME [
]/[
]
buttons.
Turn control clockwise to increase the
volume or counterclockwise to
decrease the volume.
volume or counterclockwise to
decrease the volume.
Receiver
Remote
controller
TX-85228222_En.book 21 ページ 2006年5月4日 木曜日 午前11時51分