ONKYO TX-NR801 Manual De Instruções

33

Selecting the Appropriate Setting for Your Connections—Continued

Use this sub-menu to enter which speakers are 
connected and the size of each speaker.
For your reference to speaker size settings, if the diameter 
of your speaker unit is larger than 6-1/2” (16 cm), use the 
“Large” setting; otherwise use the “Small” setting.

Yes: Select when a subwoofer is connected.
No: Select when a subwoofer is not connected.

Large: Select if the front speakers are large sized.
Small: Select if the front speakers are small sized.
• If “No” is selected for the Subwoofer setting, this 

setting is fixed to “Large.”

None: Select if no center speaker is connected.
Large: Select if the center speaker is large sized.
Small: Select if the center speaker is small sized.
• If “Small” is selected for the Front setting, “Large” 

cannot be selected for this setting.

None: Select if no surround left and right speakers 
are connected.
Large: Select if the surround left and right speakers 
are large sized.
Small: Select if the surround left and right speakers 
are small sized.
• If “Small” is selected for the Front setting, “Large” 

cannot be selected for this setting.

None: Select if no surround back left and right 
speakers are connected.
Large: Select if the surround back left and right 
speakers are large sized.
Small: Select if the surround back left and right 
speakers are small sized.
• If “None” is selected for the Surround setting, this 

setting cannot be selected.

• If “Small” is selected for the Surround setting, 

“Large” cannot be selected for this setting.

• If the Surr Back/Zone 2 setting in the Surr Back/

Zone 2 Sub-menu of the Hardware Setup Menu is 
set to “Zone 2,” this setting cannot be selected.

f. Crossover
This setting allows you to set the crossover frequency for 
your speaker system. The crossover frequency is the 
minimum frequency delivered to a speaker and can be 
set to 40 Hz, 60 Hz, 80 Hz (THX), 100 Hz, 120 Hz, or 
150 Hz.
Select “80Hz (THX)” if you are using a THX-certified 
speaker system. This setting is valid when “Subwoofer” 
is set to “Yes,” or for speakers that are set to “Small,” at 
the “Speaker Config” menu. Frequencies below this are 
cut from speakers set to “Small” and sent to the 
subwoofer (or to speakers set to “Large”).

Note:
When “Large” is set, the complete frequency range for 
that speaker channel will be output. When “Small” is set, 
the frequencies below 80 Hz for that speaker channel are 
output to the subwoofer. If Subwoofer is set to “No” in 
the 1-1. Speaker Config Sub-menu, then they will be 
output to the left and right front speakers.
Set all speakers for THX speaker systems to “small.”

Use this sub-menu to enter the distance from each 
speaker to the normal listening position. 

Notes:
• Speakers that you selected “No” or “None” for in the 

Speaker Config Sub-menu cannot be selected in this 
sub-menu.

• The difference between the distances of different 

speakers cannot be set to more than 20 feet (6 meters).

feet: Select if you will enter the distances in feet.
meters: Select if you will enter the distances in meters.

b. Left
Set the distance from the front left speaker to your 
normal listening position. This can be set between 1 and 
30 feet in 0.5 feet increments (between 0.3 and 9 meters 
in 0.15 meter increments).

c. Center
Set the distance from the center speaker to your normal 
listening position. This can be set between 1 and 30 feet 
in 0.5 feet increments (between 0.3 and 9 meters in
0.15 meter increments).

1-1.Speaker Config
 

 a.Subwoofer   :Yes 
 b.Front       :Small
 c.Center      :Small
 d.Surround    :Small
 e.Surr Back   :Small
 f.Crossover:80Hz(THX)
  

     Quit:[SETUP]

1-2.Speaker Distance 

 a.Unit        :feet 
 b.Left        :12.0ft  
 c.Center      :12.0ft
 d.Right       :12.0ft 
 e.Surr Right  : 7.0ft 
 f.Surr Back R : 7.0ft 
 g.Surr Back L : 7.0ft 
 h.Surr Left   : 7.0ft 
 i.Subwoofer   :12.0ft  
            Quit:[SETUP]