ONKYO TX-SR502 Manual De Instruções

 

45

 

This chapter explains how to record the selected input 
source to an AV component with recording capability, 
and how to record audio and video from two different 
sources.

You can record only to AV components that are con-
nected to the TAPE OUT or VIDEO 1 OUT sockets.
See pages 22–30 for information on connecting your AV 
components to the TX-SR502/TX-SR502E. 

 

• You cannot record from AV components that are con-

nected to the digital inputs. You must use analog con-
nections.

• The surround effects produced by the surround and 

DSP listening modes cannot be recorded.

• You cannot record from an AV component that is con-

nected to the multichannel input.

• If you select another input source while recording, that 

input source will be recorded instead.

With this function you can record audio and video from 
different sources, allowing you to overdub audio onto 
your video recordings. This function takes advantage of 
the fact that when an audio-only input source (i.e., 
TAPE, TUNER, or CD) is selected, the video input 
source remains unchanged. For example, if you first 
select the VIDEO 3 input source, followed by the CD 
input source, you can watch the video from the VIDEO 3 
input and listen to the audio from the CD input.

In the following example, audio from the CD player con-
nected to the CD IN sockets, and video from the cam-
corder connected to the VIDEO 3 INPUT VIDEO socket 
are recorded by the VCR, which is connected to the 
VIDEO 1 OUT sockets.

 

This selects the CD player as the audio source, but 
leaves the camcorder as the video source.

 

The video from the camcorder and the audio from 
the CD player are recorded by the VCR.

 

Audio signals from the selected input 
source are output by the VIDEO 1 OUT 
and TAPE OUT sockets.
You can listen to the source while 
recording. The TX-SR502/
TX-SR502E’s VOLUME control has 
no effect on recording.

CD

V1

V2

V3

DVD

TAPE

TUNER

TX-SR502_En.book Page 45 Tuesday, February 17, 2004 12:14 PM