ONKYO TX-SR603X Manual De Instruções
43
First Time Setup
—Continued
Component Video Setup
If you connect to a COMPONENT VIDEO IN, you must
assign it to an input selector. For example, if you connect
your DVD player to COMPONENT IN 3, you should
assign it to the DVD input selector.
assign it to an input selector. For example, if you connect
your DVD player to COMPONENT IN 3, you should
assign it to the DVD input selector.
If you want to output composite and S-Video sources
from the COMPONENT VIDEO OUT, select VIDEO,
as explained below.
from the COMPONENT VIDEO OUT, select VIDEO,
as explained below.
Note:
This procedure can also be performed on the AV receiver
by using its [SETUP] button, arrow buttons, and
[ENTER] button.
by using its [SETUP] button, arrow buttons, and
[ENTER] button.
Input selector
VIDEO IN jack
DVD
IN 1
VIDEO 1
IN 2
VIDEO 2
IN 3
VIDEO 3
VIDEO
VIDEO 4
VIDEO
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
lowed by the [SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
]/[
]
buttons to select “0. Initial
Setup,” and then press [ENTER].
Setup,” and then press [ENTER].
The Initial Setup menu appears.
3
Use the Up and Down [
]/[
]
buttons to select an input selec-
tor, and then use the Left and
Right [
tor, and then use the Left and
Right [
]/[
] buttons to select:
IN1:
Use the video component
connected to COMPO-
NENT VIDEO IN 1.
NENT VIDEO IN 1.
IN2:
Use the video component
connected to COMPO-
NENT VIDEO IN 2.
NENT VIDEO IN 2.
IN3:
Use the video component
connected to COMPO-
NENT VIDEO IN 3.
NENT VIDEO IN 3.
VIDEO:
Output composite video
and S-Video sources from
the COMPONENT
VIDEO OUT.
the COMPONENT
VIDEO OUT.
RECEIVER
ENTER
ENTER
ENTER
4
Press the [SETUP] button.
The setup menu closes.
TXSR603X.book 43 ページ ２００５年８月３日 水曜日 午後２時２分