ONKYO TX-SR607 Manual Do Utilizador

40

If you connect a video component to HDMI IN, you 
must assign that input to an input selector. For example, 
if you connect your DVD player to HDMI IN1, you must 
assign HDMI IN1 to the DVD/BD input selector.

If you’ve connected your TV to the AV receiver with an 
HDMI cable, you can set the AV receiver so that 
composite video and component video sources are 
upconverted* and output by the HDMI OUT. You can set 
this for each input selector by selecting the “- - - - -” 
option.

Notes:
• For composite video and component video 

upconversion for the HDMI OUT, the HDMI Input 
setting must be set to “- - - - -”. See page 25 for more 
information on video signal flow and upconversion.

• When an HDMI IN is assigned to an input selector as 

explained here, the digital audio input for that input 
selector is automatically set to the same HDMI IN. 
See “Digital Input Setup” on page 42.

• The TUNER input selector cannot be assigned and is 

fixed at the “- - - - -” option.

• If you connect an input component (such as UP-A1 

series Dock that seated iPod) to the UNIVERSAL 
PORT jack, you cannot assign any input to PORT 
selector.

• Do not assign the component connected with the 

HDMI input to the TV/TAPE selector when you set 
“TV Control” setting to “On” (see page 82). 
Otherwise, appropriate CEC (Consumer Electronics 
Control) operation is not guaranteed.

• This procedure can also be performed on the AV 

receiver by using its [SETUP] button, arrow buttons, 
and [ENTER] button.

Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make 
sure the appropriate external input is 
selected on your TV.

q]/[w] but-

tons to select “1. Input Assign”, 
and then press [ENTER].
The “Input Assign” menu appears.

q]/[w] but-

tons to select “1. HDMI Input”, 
and then press [ENTER].
The “HDMI Input” menu appears.

Composite video, 

component video

Composite video, 
component video

HDMI

HDMI

q]/[w] but-

e]/

r] buttons to select:

Select the HDMI IN to which 
the video component has 
been connected.

FRONT:The front HDMI IN can be 

assigned to an AUX input 
selector only.

- - - - -:  Output composite video and 

component video sources 
from the HDMI OUT. The 
video output signal from the 
HDMI OUT is the one con-
figured in “Component Video 
Setup” (see page 41).

Each HDMI IN cannot be assigned to 
more than one input selector. When 
HDMI1 - HDMI5 have already been 
assigned, you must set first any unused 
input selectors to “- - - - -” or you will 
be unable to assign HDMI1 - HDMI5 
to input selector.

Press the [SETUP] button.
The setup menu closes.