ONKYO TX-SR607 Manual Do Utilizador

41

If you connect to a COMPONENT VIDEO IN, you must 
assign it to an input selector. For example, if you connect 
your DVD player to COMPONENT VIDEO IN 2, you 
should assign it to the DVD/BD input selector.

Notes:
• If you connect an input component (such as UP-A1 

series Dock that seated iPod) to the UNIVERSAL 
PORT jack, you cannot assign any input to PORT 
selector.

• This procedure can also be performed on the AV 

receiver by using its [SETUP] button, arrow buttons, 
and [ENTER] button.

DVD/BD

IN1

VCR/DVR

- - - - -

CBL/SAT

IN2

GAME

- - - - -

AUX

- - - - -

TV/TAPE

- - - - -

TUNER

- - - - -  (Fixed)

CD

- - - - -

PORT

- - - - -

Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make 
sure the appropriate external input is 
selected on your TV.

q]/[w] but-

tons to select “1. Input Assign”, 
and then press [ENTER].
The “Input Assign” menu appears. 

q]/[w] but-

tons to select “2. Component 
Video Input”, and then press 
[ENTER].
The “Component Video Input” menu 
appears.

q]/[w] but-

e]/[r] buttons to select:

IN1:  Select if the video component 

is connected to COMPO-
NENT VIDEO IN 1.

IN2:  Select if the video component 

is connected to COMPO-
NENT VIDEO IN 2.

- - - - -:  Select if you are using the 

HDMI OUT, rather than the 
COMPONENT VIDEO 
OUT, for the output from 
composite video and compo-
nent video sources.

Press the [SETUP] button.
The setup menu closes.