ONKYO TX-SA806 Guia Do Utilizador
103
Adjusting the Volume for Zone 2
Muting Zones
Adjusting the Tone and Balance of Zone 2
Notes:
• Only analog input sources are output by the ZONE 2
• Only analog input sources are output by the ZONE 2
PRE OUT and ZONE 2 L/R speaker terminals. Digital
input sources are not output. If no sound is heard when
an input source is selected, check if it’s connected to
an analog input.
input sources are not output. If no sound is heard when
an input source is selected, check if it’s connected to
an analog input.
• While Powered Zone 2 is being used, listening modes
that need surround back speakers (i.e., Dolby Digital EX,
DTS-ES, and THX Ultra2 Cinema) are unavailable.
DTS-ES, and THX Ultra2 Cinema) are unavailable.
• While Zone 2 is on,
u functions will not work.
• You cannot select different AM or FM radio stations
for your main room and Zone 2. The same AM/FM
radio station will be heard in each room. For example,
if you have an FM station for the main room, that sta-
tion will also be used in Zone 2.
radio station will be heard in each room. For example,
if you have an FM station for the main room, that sta-
tion will also be used in Zone 2.
• Zones can also be unmuted by adjusting the volume.
• The Zone 2 level, balance, and tone functions have no
• The Zone 2 level, balance, and tone functions have no
effect on the ZONE 2 PRE OUT when the “Zone2
Out” setting is set to “Fixed” (page 101).
Out” setting is set to “Fixed” (page 101).
1
AV receiver/
AV amplifier
AV amplifier
On the AV receiver/AV amplifier,
press the [ZONE 2] button, and
then use the [LEVEL] button.
press the [ZONE 2] button, and
then use the [LEVEL] button.
2
Use the Up [
r] and Down [e]
buttons to adjust the volume.
Remote
controller
On the remote controller, press
the [ZONE 2] button, and then
use the VOL [
the [ZONE 2] button, and then
use the VOL [
q]/[w] button.
Remote
controller
On the remote controller, press
the [ZONE 2] button, and then
press the [MUTING] button.
the [ZONE 2] button, and then
press the [MUTING] button.
To unmute a zone, on the remote
controller, press the [ZONE 2]
button, and then press the [MUT-
ING] button again.
controller, press the [ZONE 2]
button, and then press the [MUT-
ING] button again.
1
AV receiver/
AV amplifier
AV amplifier
On the AV receiver/AV amplifier,
press the [ZONE 2] button.
press the [ZONE 2] button.
2
Press the AV receiver/AV ampli-
fier’s [TONE] button repeatedly to
select “Bass”, “Treble” or “Bal-
ance”.
fier’s [TONE] button repeatedly to
select “Bass”, “Treble” or “Bal-
ance”.
3
Use the Up [
r] and Down [e]
buttons to adjust the Bass, Tre-
ble or Balance.
• You can boost or cut the Bass or Tre-
ble or Balance.
• You can boost or cut the Bass or Tre-
ble from –10 dB to +10 dB in 2 dB
steps.
steps.
• You can adjust the balance from 0 in
the center to +10 dB to the right or
+10 dB to the left in 2 dB steps.
+10 dB to the left in 2 dB steps.
ZONE 2
TONE
,
TX-SR806_En.book Page 103 Monday, August 4, 2008 10:25 AM