ONKYO TX-SA806 Guia Do Utilizador

105

You can use the AV receiver/AV amplifier’s remote con-
troller (RC-717M) to control your other AV components, 
including those made by other manufacturers. This sec-
tion explains how to: 
• Enter the remote control code for a component that 

you want to control: DVD, TV, VCR, etc.

• Learn commands directly from another component’s 

remote controller (see page 114).

• Program the MACRO buttons to perform a sequence 

of up to eight remote control actions (see page 115).

The following REMOTE MODE buttons are prepro-
grammed with remote control codes for controlling the 
components listed. You do not need to enter a remote 
control code to control these components.
For details on controlling these components, see the 
pages indicated.

You’ll need to enter a code for each component that you 
want to control.

Note:
The remote control codes provided are correct at the time 
of printing, but are subject to change.

Onkyo DVD player (page 108)

Onkyo CD player (page 111)

Onkyo cassette recorder with 

u (page 113)

Onkyo RI Dock with 

u (page 112)

Look up the appropriate remote 
control code in the separate 
Remote Control Codes list.
The codes are organized by category 
(e.g., DVD player, TV, etc.).

(3 seconds)

While holding down the REMOTE 
MODE button to which you want 
to enter a code, press and hold 
down the [DISPLAY] button 
(about 3 seconds).
The REMOTE MODE button lights up.

Notes:
• Remote control codes cannot be 

entered for the [RECEIVER] and 
[ZONE 2] buttons.

• Only TV remote control codes can be 

entered for the [TV] button.

• Apart from the [RECEIVER], [TV], 

and [ZONE 2] buttons, remote con-
trol codes from any category can be 
entered for the REMOTE MODE 
buttons. However, these buttons also 
work as input selector buttons 
(page 56), so choose a REMOTE 
MODE button that corresponds with 
the input to which you connect your 
component. For example, if you con-
nect your CD player to the CD input, 
choose the [CD] button when enter-
ing its remote control code.

Within 30 seconds, use the num-
ber buttons to enter the 5-digit 
remote control code.
The REMOTE MODE button flashes 
twice.
If the remote control code is not entered 
successfully, the REMOTE MODE 
button will flash once slowly.

TX-SR806_En.book  Page 105  Monday, August 4, 2008  10:25 AM