ONKYO TX-SA806 Guia Do Utilizador
45
Component Video Setup
If you connect to a COMPONENT VIDEO IN, you must
assign it to an input selector. For example, if you connect
your DVD player to COMPONENT VIDEO IN 2, you
should assign it to the DVD input selector.
If you want to output composite and S-Video sources
from the COMPONENT VIDEO MONITOR OUT,
select “- - - - -”, as explained below.
assign it to an input selector. For example, if you connect
your DVD player to COMPONENT VIDEO IN 2, you
should assign it to the DVD input selector.
If you want to output composite and S-Video sources
from the COMPONENT VIDEO MONITOR OUT,
select “- - - - -”, as explained below.
If you’ve connected your TV to the AV receiver/AV
amplifier with a component video cable, you can set the
AV receiver/AV amplifier so that composite video and S-
Video sources are upconverted* and output by the COM-
PONENT VIDEO MONITOR OUT.
You can set this for each input selector by selecting the
“- - - - -” option.
amplifier with a component video cable, you can set the
AV receiver/AV amplifier so that composite video and S-
Video sources are upconverted* and output by the COM-
PONENT VIDEO MONITOR OUT.
You can set this for each input selector by selecting the
“- - - - -” option.
Notes:
• For composite video and S-Video upconversion for
• For composite video and S-Video upconversion for
the COMPONENT VIDEO MONITOR OUT, the
“Monitor Out” setting must be set to “Analog” (see
page 41), and the “Component Video Input” setting
must be set to “- - - - -”. See page 24 for more informa-
tion on video signal flow and upconversion.
“Monitor Out” setting must be set to “Analog” (see
page 41), and the “Component Video Input” setting
must be set to “- - - - -”. See page 24 for more informa-
tion on video signal flow and upconversion.
• This procedure can also be performed on the AV
receiver/AV amplifier by using its [SETUP] button,
arrow buttons, and [ENTER] button.
arrow buttons, and [ENTER] button.
Input selector
Default assignment
DVD
IN1
VCR/DVR
- - - - -
CBL/SAT
IN2
GAME/TV
- - - - -
AUX
- - - - -
TAPE
- - - - -
TUNER (TX-SA806 only)
- - - - -
CD
- - - - -
PHONO
- - - - -
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
2
Use the Up and Down [
q]/[w] but-
tons to select “1. Input Assign”,
and then press [ENTER].
The “Input Assign” menu appears.
and then press [ENTER].
The “Input Assign” menu appears.
IN
OUT
Composite video, S-Video
Composite video, S-Video
Component video
Component video
1. Input
Assign
1. HDMI
Input
2. Component
Video
Input
3. Digital Audio Input
3
Use the Up and Down [
q]/[w] but-
tons to select “2. Component
Video Input”, and then press
[ENTER].
The “Component Video Input” menu
appears.
Video Input”, and then press
[ENTER].
The “Component Video Input” menu
appears.
4
Use the Up and Down [
q]/[w] but-
tons to select an input selector,
and then use the Left and Right
[
and then use the Left and Right
[
e]/[r] buttons to select:
IN1: Use the video component
connected to COMPONENT
VIDEO IN 1.
VIDEO IN 1.
IN2: Use the video component
connected to COMPONENT
VIDEO IN 2.
VIDEO IN 2.
- - - - -: Output composite video and
S-Video sources from the
COMPONENT VIDEO
MONITOR OUT.
COMPONENT VIDEO
MONITOR OUT.
5
Press the [SETUP] button.
The setup menu closes.
The setup menu closes.
1–2. Component
Video
Input
DVD
VCR/DVR
CBL/SAT
GAME/TV
AUX
TAPE
VCR/DVR
CBL/SAT
GAME/TV
AUX
TAPE
TUNER
CD
PHONO
PHONO
IN1
- - - - -
IN2
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
TX-SR806_En.book Page 45 Monday, August 4, 2008 10:25 AM