Samsung DVD-VR330 Manual De Instruções
English
- 89
R
eference
If your product malfunctions, go through the check points below before contacting a Samsung authorized
service centre.
service centre.
Problem Explanation/Solution
• Check whether the power cord is securely plugged into the power outlet.
• Did you press the /I button of your DVD Recorder & VCR.
• Did you press the /I button of your DVD Recorder & VCR.
The DVD Recorder & VCR requires some time to initialize after it is turned on.
If ‘Quick Recording’ function is set to on, the DVD Recorder & VCR will power on quickly,
which enables you to immediately record a desired channel. (see page 38)
If ‘Quick Recording’ function is set to on, the DVD Recorder & VCR will power on quickly,
which enables you to immediately record a desired channel. (see page 38)
• Check whether the power cord is securely plugged into the power outlet.
• Did you set the DVD Recorder & VCR programme settings correctly?
• Check the free space on your DVD-RW/-R disc.
• Check the antenna cable is connected.
• Did you set the DVD Recorder & VCR programme settings correctly?
• Check the free space on your DVD-RW/-R disc.
• Check the antenna cable is connected.
• Check the recording time, end time and current time settings again.
• Recording will be canceled if the power is interrupted due to a power
• Recording will be canceled if the power is interrupted due to a power
failure or other reason during recording.
• Check whether the disc is formatted. This product can record on
formatted discs only.
• Check whether your DVD-RW/-R disc has a sufficient free space.
Recording is available on DVD-RW/-R discs only.
If a programme is copy protected, you cannot record it.
If a programme is copy protected, you cannot record it.
Press the PROG (
/
) buttons of your DVD Recorder & VCR at the same time when the
power is on, and then press the STANDBY/ON button.
All settings including password will revert to factory settings.
Do not use it if not absolutely required.
(Note that this function is available only when there is no disc inserted.)
Do not use it if not absolutely required.
(Note that this function is available only when there is no disc inserted.)
• Check whether the disc is inserted correctly with the label facing up.
• Check the regional code of your DVD disc.
• This DVD Recorder & VCR cannot playback some types of disc.
• Check the regional code of your DVD disc.
• This DVD Recorder & VCR cannot playback some types of disc.
• Are you watching a programme in slow or skip mode?
If you are playing a programme at a speed other than normal speed, sound
is not output. (except for forward search Playback (Fast 1) and you cannot also hear during
scanning MPEG4 in all mode.)
• Check the connections and initial settings.
• Check whether the disc is damaged.
• Check whether the disc is damaged.
Clean up the disc, if necessary.
• Check whether the disc is inserted correctly with the label facing up.
The input is displayed
for a while when the
power turns on.
for a while when the
power turns on.
Cannot record TV
programmes.
programmes.
Timer recording does
not work properly.
not work properly.
Cannot record.
I pressed the REC
button but there is
no response.
button but there is
no response.
I forgot the password
for parental lock.
for parental lock.
Cannot play the disc.
No sound.
No power.
Troubleshooting (DVD)
01010E-VR330/336-EUR-ENG3 2006.4.14 2:47 PM Page 89