Copystar cs-1635 Guia Do Utilizador

Dark copies are 
produced.

Check to see if the copier is in 
Auto Exposure Mode.

When the exposure is to be 
changed overall, perform out the 
“Auto Exposure Adjustment”.

Check to see if the copier is in 
Manual Exposure Mode.

Use Exposure Adjustment to set 
the proper exposure.

When the exposure is to be 
changed overall, perform the 
Manual Exposure Adjustment in 
each original mode.

Spotting (the 
shading fails to line 
up uniformly and 
spots occur).

Check to see whether the 
original is a printed original or 
not.

Select “Photos” in the Image 
Quality Mode.

The copy is not 
clear.

Check to see whether an Image 
Quality Mode that matches the 
type of original being copied has 
been selected or not.

Select the appropriate Image 
Quality Mode.

The copy is dirty.

Check to see if the Platen or 
Original Cover is dirty.

Clean the Platen and Original 
Cover.

The copy image is 
skewed.

Check to see that the original 
has been set properly.

Make sure that the original is 
correctly set against the Original 
Size Indicator Plate when 
placing the original on the platen.
When setting the original in the 
optional Document Processor 
make sure that the original is 
correctly aligned with the original 
insertion guide.

Check to see that the paper has 
been set properly.

Check the position of the Width 
Guide in the cassette.