Avaya 6211 Cartão De Referência Rápida
4
To return to the held call
1
Press
, or, if you have hung up the handset,
lift the handset again from the cradle.
(The red Hold light goes off.)
■
You are reconnected to the other party.
To retrieve a message when your Message light is
blinking
blinking
1
See your system manager for instructions about your
local message retrieval procedures.
local message retrieval procedures.
Note: The Message light also flashes when a call is coming
in (that is, when the telephone is ringing).
in (that is, when the telephone is ringing).
To redial the last number that you dialed
1
While off-hook, press
.
(The telephone will redial up to 24 digits.)
To control the volume of the tone ringer
Note: The volume control is labeled
Note: The volume control is labeled
.
1
To raise the volume of the ringer, slide the Ringer volume
control upwards; to lower the volume of the ringer, slide
the Ringer volume control downwards.
control upwards; to lower the volume of the ringer, slide
the Ringer volume control downwards.
PROCEDURES FOR INSTALLING THE
TELEPHONE
TABLE/DESK INSTALLATION
Use the 7-foot straight line cord that came with your
telephone to connect the telephone to a modular jack.
telephone to connect the telephone to a modular jack.
!
WARNING:
Do not plug the handset cord into the line jack or the
data jack on your telephone since it could damage your
handset and the telephone.
data jack on your telephone since it could damage your
handset and the telephone.
1
Turn the telephone upside down so that you can see the
bottom of the telephone. See Figure 3.
bottom of the telephone. See Figure 3.
Figure 2. The Bottom of the 6200 Series Telephones
Hold
MESSAGE
REDIAL
Redial
RINGER VOLUME
Desktop
Line jack
stand
wall mounting
4 holes for
230709i3.fm Page 4 Thursday, February 27, 2003 2:28 PM