Avaya 6211 Guia Do Utilizador



bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb

d

Settings:  NORMAL, IGNORE

This option allows you to specify how the HSL should respond to
the DTR input lead.

When you set the DTR LEAD option to NORMAL, the DTR input
lead functions as required for switched network applications.

Set the DTR LEAD option to NORMAL when the local terminal
equipment uses the V.35 DTR lead to disconnect calls.

When you set the DTR LEAD option to IGNORE, the HSL ignores
the DTR input lead and operates as if the lead is always ON as
required by private line applications.  The DTR and HOTLINE
dial methods are disabled when this option is set to IGNORE.

ffffffffffffffffffffffffffffffffffffffffffff

d

Settings:  NORMAL, ON

This option controls the operation of the DSR output lead.

When you set the DSR LEAD option to NORMAL, the DSR output
lead functions as required for switched network applications.

When you set the DSR LEAD option to ON, the DSR output lead
is ON, except during a self-test, as required by private line
applications at all times.

ffffffffffffffffffffffffffffffffffffffffffff

d

Settings: YES, NO

The permanent connection option allows you to option the HSL
for compatibility with the PBX for dedicated (private line) or
dialed (switched) type data service.

Set the PERMANENT CONNECTION option to YES when the
HSL is used in private line applications.

Set the PERMANENT CONNECTION option to NO when the
HSL is used in switched network applications.

When you set permanent connection to YES, you must set
the answer option to AUTO.  You should also set the DTR
LEAD option to IGNORE, and dial method to MANUAL.

Refer to Appendix D, ‘‘Applications and Switch Administration’’
for further details.