Avaya 6211 Guia Do Utilizador



bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb

This chapter discusses the guidelines and procedures for
operating the DEFINITY High Speed Link from the front panel,
RS-366 interface, RS-232 interface, DTR dialing, and HOTLINE.

ffffffffffffffffffffffffffffffffffffffffffff

When you dial a call, you must provide the HSL with the number
of the called endpoint. You can select one of the following
methods for dialing a data call depending on your equipment:

d

RS-366 interface (number supplied by data equipment)

d

RS-232 interface (number supplied by data equipment)

d

DTR dialing (number stored by user in the HSL memory)

d

HOTLINE (number supplied by the switch)

d

MANUAL (dialing from the front panel only).

When using the RS-366/RS-232 interface, the DTR input
lead on the V.35 interface must be ON or the DTR LEAD
option must be set to IGNORE before you can dial a call.
The DTR lead option must be set to NORMAL for DTR
and HOTLINE dialing.

Calls may be dialed manually using the front panel when
either the RS-366 or RS-232 dial method is selected, but
not for DTR or HOTLINE.

ffffffffffffffffffffffffffffffffffffffffffff

Press 

ENTER/YES 

when the HSL displays 

Call

Control? 

The HSL displays 

DIAL? 

if the HSL is idle.

Press 

ENTER/YES 

while 

DIAL? 

is displayed.  The HSL

displays 

DIAL: nnn...?

, where 

nnn... 

is the number

stored in memory location 

M0

.

If the stored number is more than 9 digits, 

DIAL 

is

omitted and only the number is displayed.

Press 

NEXT/NO 

to step through the four memory locations

to select the desired stored number.

Press 

ENTER/YES 

when the desired number is displayed,

and the HSL dials the number.