Avaya merlin ii Guia Do Utilizador
To change any of these Call Processing Options:
1
2
3
4
5
6
7
8
Dial the MERLIN II Attendant extension number from a Touch-Tone
phone, preferably a single-line set.
phone, preferably a single-line set.
NOTE:
If
you are programming from a multiline Touch-Tone phone
connected to a MERLIN II system control unit, you must enter an
additional pound ( # ) sign each time a pound ( # ) sign appears in
a programming command.
additional pound ( # ) sign each time a pound ( # ) sign appears in
a programming command.
Wait for an answer.
Dial * followed immediately by your authorized caller number and #.
The two-beep combination tone sounds.
Dial * followed by “Program Code” shown on Table 2-3.
2 9 0 1
=
Day Answer Delay
2 9 0 2
=
Night Answer Delay
2 9 0 3
=
Dialing Delay
2 9 0 4
=
Extension Delay
2 9 1 6
=
Extension Digits
2 9 1 8
=
Extension Transfer
9 7 0 9
=
Lowest Extension
9 7 1 0
=
Highest Extension
Dial the number you have entered under “Current Setting”.
Dial #.
The two-beep confirmation tone sounds.
NOTE:
Commands 9709 and 9710 require an additional # to enter.
Continue programming or exit authorized caller mode by dialing * #.
To disconnect, dial #.
2-14 Changing the Current Settings