Avaya 3910 Guia Do Utilizador

This System Programming procedure copies all of the following settings from
one extension to another:

#301 Line Assignment
#302 Line Access Restriction
#303 Display Language
#304 Automatic Extension Privacy
#305 Abbreviated Ringing
#307 Forced Account Code Entry
#308 Distinctive Ring
#309 Intercom Dial Tone
#310 Automatic VMS Cover
#311 Emergency Telephone
#312 Voice Interrupt On Busy

#401 Outgoing Call Restriction
#405 Disallowed List Assignments
#408 Allowed List Assignments
#501 Pickup Group Extensions
#502 Calling Group Extensions
#504 Night Service Group
#505 Hunt Group Extensions
#601 Fax Machine Extensions
#607 AA Extensions
Automatic Line Selection
Line Ringing

■

■

This procedure is skipped in the sequence of programming procedures
when cycling. To use this procedure, enter the code  (#399)  directly.

For each type of phone, program that phone and then use this procedure to
copy the programming from the extension to the others with the same

number of line buttons (for example, from an MLS-12D to an MLS-12).

To copy the programmed settings of one extension to another of the same type:

1.

Press 

 

   

   

   

   

   

   

   

   

 .

2.

At the 

Extension: 

prompt, enter the source extension to copy from. For

example, to copy the current settings from extension 18, press 

 

   

 .

3.

At the 

Data -- 

prompt, enter the extension to copy to—any extension except

the source extension is valid. For example, to copy to extension 22, press

 

   

 .

4.

At this point:

■

■

To copy the same settings to another extension, enter the new

extension number.

To copy another extension’s settings, press 

 

  

or 

 

  

until

the extension number shows on the display. Repeat Step 3.

5.

Select another procedure or exit programming mode.

Copy Settings (#399)