Avaya 3910 Guia Do Utilizador
Valid Entries
1 = Assigned (for hunting to groups 1–6, or to group 7 for the voice messaging
system’s Automated Attendant Service)
2 = Not Assigned
✔
3 = VMS Line Cover (available only for Hunt Group 7)
Programming
To set up lines for Group Call Distribution:
1.
2.
3.
4.
5.
6.
Press
Feature
0
0
System Program
System Program
#
2
0
6
.
At the
Group:
prompt, enter a group number (1–6; 7 for the voice messaging
system). For example, to select group 1, press
1
.
At the
Line:
prompt, enter the line to be programmed. For example, to select
line 1, press
0
1
.
To assign or remove a line for groups 1–6, or to assign or remove a line or use
VMS Line Cover for group 7, press
VMS Line Cover for group 7, press
Next Data
until the appropriate value
displays.
At this point:
■
To program another line, press
Next Item
or
Prev Item
until the line
number shows on the display. Then repeat Step 4.
■
To program another group, press
Next Procedure
Prev Procedure
,
enter a
new group number, and repeat Steps 3 and 4.
Select another procedure or exit programming mode.
Group Call Distribution (#206)
5-55