Avaya 1603 Guia Do Utilizador

●

Status is 100Mbps FDX when PHY2STAT = 5

5. To change the PHY2 value, press *.

Depending on the current value, the next sequential valid PHY2 value is selected and 
displayed as the status. For example, if the current value is 10Mbps HDX (2), pressing * 
changes the value to 3 (10Mbps FDX). 

The following text displays left-justified at the top of the display:

6. Press the * button to terminate the procedure, or the # button to save the new values. 

If you press the # button, the following text displays.

The new values are saved and a restart occurs automatically. The user interface is restored 
to its previous state.

If you are using static addressing and encounter problems, use the following procedure to verify 
the current values of system parameters and file versions. 

Note:

Unless otherwise prevented using administration, the user can view but not 
change most of the parameters associated with Local Administrative Procedures. 
For more information about this option, see the applicable user guide(s).

Note:

If the View Network Information option is not available due to being disabled by 
administration, use the ADDR option to view IP addresses. See 

on page 82. The IP addresses might have been entered 

incorrectly. Verify whether you were provided with correct IP addresses.