Avaya merlin plus Guia Do Utilizador

Dial two digits for the closing hour (00 through 23) using 24-hour time
(00 is midnight).

Dial two digits for the closing minute (00 through 59).
The two-beep confirmation tone sounds.

Repeat steps 4 through 8 of this procedure for each additional day as
needed.

Continue programming or exit authorized caller mode by dialing * # #.

If you have more than one MERLIN Attendant, you may transfer

to each one by dialing the intercom numbers assigned to them—
usually 11, 12, and 13. Follow the procedures in this section to
program every MERLIN Attendant identically.

To disconnect, dial # #.

If you are extending your normal business hours or closing early, use this

command so that the MERLIN Attendant plays the appropriate day or night

announcement.

For example, if your store is having a special sale and is extending hours until

11:00 p.m. instead of closing at 9:30 p.m., use this command to make the

MERLIN Attendant continue to answer with the day announcement until you
indicate otherwise. Likewise, if your office is closing early, use this command

at the time your office closes to turn on the night announcement. To resume

your normal schedule, you must cancel this command.

Select an outside line and dial a telephone number that is answered by
your MERLIN Attendant.

If you are programming from a remote location using a single-line

standard Touch-Tone phone, enter only one pound sign (#) for
every two pound signs ( # # ) that appear in a programming
command.

Wait for an answer.

Dial * followed immediately by your authorized caller code and # #.
The two-beep confirmation tone sounds.

Dial *75 followed by the appropriate option:

Continue programming or exit authorized caller mode by dialing * ##.

If you have more than one MERLIN Attendant, you may transfer

to each one by dialing the intercom numbers assigned to them—
usually 11, 12, and 13. Follow the procedures in this section to
program every MERLIN Attendant identically.

To disconnect, dial # #.

Changing the Current Settings  2-5