Avaya merlin plus Guia Do Utilizador

To adjust the MERLIN Attendant’s clock by one hour (for daylight saving

time), use the following instructions.

Select an outside line and dial a telephone number that is answered by

your MERLIN Attendant.

If you are programming from a remote location using a single-line

standard Touch-Tone phone, enter only one pound sign (#) for
every two pound signs ( # # ) that appear in a programming
command.

Wait for an answer.

Dial * followed immediately by your authorized caller code and # #.

Dial *72.

Perform the appropriate procedure:

➤ Dial 1 to add one hour to the current time (normally used in the spring

to begin daylight saving time).

➤ Dial 2 to subtract one hour from the current time (normally used in the

fall to cancel daylight saving time).

Continue programming or exit authorized caller mode by dialing * # #.

If you have more than one MERLIN Attendant, you may transfer

to each one by dialing the intercom numbers assigned to them—
usually 11, 12, and 13. Follow the procedures in this section to
program every MERLIN Attendant identically.

To disconnect, dial # #.

Three types of recorded announcements are available with the
MERLIN Attendant: Day, Night, and Hold.

The total duration for all recorded announcements for the MERLIN Attendant
must equal 64 seconds. Each recorded announcement has a maximum duration
in seconds as follows:

Day

25

Night

25

Hold

14

 Total

64

Changing the Current Settings  2-7