Epson WP-4530 Cartão De Referência Rápida

Receiving Faxes

■

If you are scanning with the ADF (see page 5), your document is automatically 
scanned and faxed.

■

If you placed your document on the scanner glass, you can scan additional pages 
after the first one is sent. 

■

If the fax number is busy, you see a redialing message and the product redials 
after one minute. To redial immediately, press 

Redial/Pause

.

Note: If you turn off the product, the following data stored in the product’s temporary 
memory will be lost: received faxes that haven’t yet been printed, faxes scheduled to 
be sent later, and faxes being retransmitted automatically.

Before receiving faxes, make sure you load plain paper and select the correct settings for the 
paper you’ve loaded.

1.

Press F 

Setup

.

2.

Select 

Fax Settings

.

3.

Select 

Receive Settings

.

4.

Select 

Paper Source to Print.

5.

Select the paper source you want to change, then change the setting.

Note: If the incoming fax is larger than the paper you loaded, it is reduced to fit or 
printed on multiple pages, depending on the Auto Reduction setting you select.

6.

To receive faxes automatically, make sure you see a green light next to 

(

Auto 

Answer)

 on the control panel. If the light is off, press 

.

Note: To change the number of rings before the product answers, see page 12.

If you run out of paper during printing, you see an error message. Load more paper and 
press one of the x 

Start

 buttons to continue.