KYOCERA FS-2000D Guia De Utilização

The message display on the operation panel shows:

•

Status information, the messages listed below which are displayed 
during normal operation.

•

Error codes, when the printer requires the operator’s attention; as 
explained in the Operation Guide.

Refer to the Troubleshooting section in the Operation Guide.

Self test

The printer is performing self-diagnostics after power-up.

Please wait

The printer is warming up and is not ready. This message may be displayed 
during continuous printing of a large volume of pages which require a large 
amount of toner such as with photographs, etc.

Please wait

(Adding toner)

Toner is currently being replenished. 
When the printer is switched on for the first time, this message will take several 
minutes.

Ready

The printer is ready to print.

Processing

The printer is receiving data to print. This is also shown when the printer is 
reading a CompactFlash card, Microdrive, RAM disk, or USB flash memory.

Sleeping

The printer is in Auto Sleep. The printer wakes from Auto Sleep whenever a key 
on the operation panel and [GO] is pressed, the cover is opened or closed, or a 
print job is received. The printer then warms up and goes on-line. For details on 
Auto Sleep, refer to Sleep Timer Timeout Time on page 2-80.

Skipping data

The printer is skipping the data.

Waiting

The printer is waiting for the rest of print job before completing the last page. 
Pressing [GO] allows you to obtain the last page immediately. Refer to below.

FormFeed TimeOut

The printer is printing the last page after a waiting period.