KYOCERA FS-2000D Guia De Utilização
Using the Operation Panel
ADVANCED OPERATION GUIDE
2-5
Indicators in Message Display
Interface Indicator (INTERFACE)
The interface indicator shows the interface that is currently in use:
Each interface has a timeout time of 30 seconds (factory default) during
which the other interface should wait to receive a print job. Even after a
print job has been completed on the interface, you should wait for this
period until the other interface begins printing the job.
which the other interface should wait to receive a print job. Even after a
print job has been completed on the interface, you should wait for this
period until the other interface begins printing the job.
Paper Size Indicator (SIZE)
This indicator shows:
•
While the printer is in standby, the paper size of the current cassette.
The default paper cassette is determined by the operation panel keys.
For details, refer to Paper Handling on page 2-64.
The default paper cassette is determined by the operation panel keys.
For details, refer to Paper Handling on page 2-64.
•
While the printer is printing, the paper size used to format the
document to print by the application software.
document to print by the application software.
The abbreviations used to indicate the paper sizes and their dimensions
are as follows:
are as follows:
Ready
PAR A4 PLAIN
PAR
Parallel interface is in use.
USB
USB interface is in use.
SER
Serial (RS-232C) interface is in use. (option)
NET
Network interface is in use. (FS-2000D: appears only when
the optional network interface card IB-30 is installed.)
the optional network interface card IB-30 is installed.)
OPT
Network interface is in use. (option)
---
No interface is in use.
A4
ISO A4 (210 × 297mm)
A5
ISO A5 (148 × 210mm)
A6
ISO A6 (105 × 148mm)
†
B5
JIS B5 (182 × 257mm)
B6
JIS B6 (128 × 182mm)
††
LT
Letter (8
1/2
× 11 inches)
LG
Legal (8
1/2
× 14 inches)