KYOCERA FS-2000D Guia De Utilização

Job storage stores print jobs either temporarily or permanently, or in virtual 
mailboxes, as you click an appropriate radio button on the printer driver 
when printing from a computer.

Virtual mailbox is part of Job Storage, which stores print jobs on the 
Microdrive without printing. It enables you to retrieve jobs later from the 
operation panel.

Each mailbox may be used by an individual who desires to share the 
printer in this mode. By default, each mailbox is numbered from ‘Tray 001,’ 
‘Tray 002,’... etc. To ‘post’ a job in one of these mailboxes, you assign a 
numbered or named mailbox on the printer driver when printing.

To retrieve the stored job for printing, refer to Retrieving Jobs from Virtual 
Mailbox (VMB) on page 2-24.

The virtual mailbox can be used in PCL 6 emulation only.

This mode enables you to print the requested number of copies of a job, 
simultaneously storing the job on the Microdrive. When additional copies 
are required, you can reprint the required number of copies from the printer 
operation panel.

The default number of print jobs that can be stored on the Microdrive is 32. 
This value can be increased to up to 50 from the e-MPS Configuration 
menu. For details, refer to Changing the Maximum Number of Quick Copy/
Proof-and-Hold Jobs on page 2-26. When the number of jobs reaches the 
limit, the oldest job will be overwritten by the new one. When the printer is 
turned off, all stored jobs will be deleted.

Press [Menu].

Press  ? or @ repeatedly until e-MPS > 
appears.

Press B.

Press  ? or @ repeatedly until >Quick 
Copy

 appears followed by the user name 

(Harold, in this example). The user name 
is assigned at printing using the printer 
driver.

e-MPS          >

>Quick Copy

 Harold