KYOCERA FS-2000D Guia De Utilização

Printing a Proof-and-Hold job on the operation panel is similar to printing a 
quick copy job. Refer to Printing Additional Copies using Quick Copy on 
page 2-20

In private printing, you can specify that a job is not printed until you release 
the job from the operation panel. When sending the job from the 
application software, specify a 4-digit access code in the printer driver. The 
job is released for printing by entering the access code on the operation 
panel ensuring confidentiality of the print job.

In the stored job mode, access codes are not mandatory, but can be set 
on the printer driver if printing with PIN security is required. Then, the 
access code must be entered on the operation panel to print a stored job. 
Print data will be stored in the Microdrive after printing.

Press [Menu].

Press  ? or @ repeatedly until e-MPS > 
appears.

Press B. 

Press  ? or @ repeatedly until >Private/
Stored

 appears. The name entered in the 

printer driver (Harold, in this example) also 
appears.

Press [OK]. A blinking question mark (?) 
appears before the user name.

Press  ? or @ to display the desired user 
name (Arlen, in this example).

Press [OK]. The user name and the job 
name (Agenda, in this example) entered in 
the printer driver appear with a blinking 
question mark (?).

Press  ? or @ to display the desired job title. 

e-MPS          >

>Private/Stored

 Harold

>Private/Stored

?Harold

>Private/Stored

?Arlen

>Arlen

?Agenda