Sony MDS-JE440 Manual
32
masterpage:Left
filename[\\Win-35\logitecmo\422958711MDSJE640CED\01GB03OPE-CED.fm]
Erasing tracks
Editin
g Rec
o
rd
ed
MDs
model name1[MDS-JE640] model name2[MDS-JE440]
[4-229-587-11(1)]
Do the procedure below to erase all the tracks, track
names, and disc name at once.
names, and disc name at once.
1
While the deck is stopped, playing, or paused,
press MENU/NO.
press MENU/NO.
“Edit Menu” appears in the display.
2
Turn AMS (or press
.
/
>
repeatedly) until “All
Erase ?” appears, then press AMS or YES.
“All Erase ??” appears in the display.
3
Press AMS or YES.
“Complete!!” appears for a few seconds and all the
tracks, track names, and disc name are erased.
tracks, track names, and disc name are erased.
To cancel the operation
Press MENU/NO or
x.
You can easily erase a portion of a track by specifying the
starting and ending points of the erasure.
This is useful for erasing the unnecessary portions of a
track recorded from a satellite or FM broadcast.
starting and ending points of the erasure.
This is useful for erasing the unnecessary portions of a
track recorded from a satellite or FM broadcast.
Example: Erasing portion “B2” of the second
track
track
1
While the deck is stopped, playing, or paused,
press MENU/NO.
press MENU/NO.
“Edit Menu” appears in the display.
2
Turn AMS (or press
.
/
>
repeatedly) until “A-B
Erase ?” appears, then press AMS or YES.
3
Turn AMS (or press
.
/
>
repeatedly) until the
number of the track containing the portion to be
erased appears, then press AMS or YES.
erased appears, then press AMS or YES.
“-Rehearsal-” and “Point A ok?” alternate in the
display and the deck repeatedly plays several seconds
of the track from the point AMS or YES was pressed.
display and the deck repeatedly plays several seconds
of the track from the point AMS or YES was pressed.
4
While monitoring the sound, turn AMS (or press
.
/
>
repeatedly) to locate the starting point of
the portion to be erased (point A).
You can shift the starting point by 1-frame* intervals
(1 frame = 1/86 second).
The time indication (minute, second, and frame) of the
current point is displayed and the deck plays several
seconds of the track to that point repeatedly.
(1 frame = 1/86 second).
The time indication (minute, second, and frame) of the
current point is displayed and the deck plays several
seconds of the track to that point repeatedly.
*
When recording in Stereo mode, you can shift the starting
point by 2-frame intervals (in Monaural mode and LP2
Stereo mode) or by 4-frame intervals (in LP4 Stereo
mode)
point by 2-frame intervals (in Monaural mode and LP2
Stereo mode) or by 4-frame intervals (in LP4 Stereo
mode)
.
To find a point quickly
Specify a unit (minute, second, or frame) by which the
MD is advanced when you turn AMS (or press
MD is advanced when you turn AMS (or press
./
> repeatedly).
To do this, press
To do this, press
m/M in step 4 repeatedly to select
minute, second, or frame. The selected unit flashes in
the display.
the display.
5
Repeat step 4 until you have located point A.
6
Press AMS or YES to enter point A.
“Point B set” appears and the deck starts playing from
point A until the track ends.
point A until the track ends.
7
Continue playing the track or press
M
to locate
the ending point of the portion to be erased (point
B), then press AMS or YES.
B), then press AMS or YES.
“A-B Ers” and “Point B ok?” alternate in the display
and a few seconds of the track before point A and after
point B play back repeatedly.
and a few seconds of the track before point A and after
point B play back repeatedly.
8
Repeat step 4 until you have located point B.
9
Press AMS or YES to enter point B.
“Complete!!” appears for a few seconds and the
portion between point A and B is erased.
portion between point A and B is erased.
To cancel the operation
Press MENU/NO or
x.
Note
If “Impossible” appears in the display, you cannot erase a
portion of a track. This happens when you have edited the same
track many times.
This is due to a technical limitation of the MD system and is not
a mechanical error.
portion of a track. This happens when you have edited the same
track many times.
This is due to a technical limitation of the MD system and is not
a mechanical error.
Erasing all the tracks on an MD
Erasing a portion of a track
AAA
BBB
B1
B3
B2
CCC
1
2
3
AAA
B1
B3
CCC
1
2
3
BBB