Sony LBT-SH2000 Manual
model name [LBT-SH2000]
[4-273-674-81(1)] US
30
US
filename[D:\NORM'S JOB\SONY HA\SO120012\LBT-
SH2000\4273674811_US\US080ADD.fm]
SH2000\4273674811_US\US080ADD.fm]
masterpage:Left
Tuner
Severe hum or noise, or stations
cannot be received. (“TUNED” or
“STEREO” flashes in the display
panel.)
cannot be received. (“TUNED” or
“STEREO” flashes in the display
panel.)
• Connect the antenna properly.
• Find a location and an orientation that
• Find a location and an orientation that
provide good reception, and then set up
the antenna again.
the antenna again.
• Connect a commercially available
external antenna.
• Consult your nearest Sony dealer if the
supplied AM antenna has come off the
plastic stand.
plastic stand.
• Turn off surrounding electrical
equipment.
To reset the system
If the system still does not operate
properly after performing the above
measures or other troubles not described
above occur, reset the system to factory
settings.
Use the buttons on the unit to perform this
operation.
properly after performing the above
measures or other troubles not described
above occur, reset the system to factory
settings.
Use the buttons on the unit to perform this
operation.
1
Unplug and plug the power cord
back in.
back in.
2
Press "/1 to turn on the system.
3
Hold down x and follow by "/1 for
about 3 seconds.
“COLD RESET” appears in the display
panel.
All user-configured settings, such as
preset radio stations, timer, and the
clock are reset to factory setting.
about 3 seconds.
“COLD RESET” appears in the display
panel.
All user-configured settings, such as
preset radio stations, timer, and the
clock are reset to factory setting.
Messages
Disc/Timer
CANNOT PLAY
You have inserted a disc that cannot be
played back on this system.
You have inserted a disc that cannot be
played back on this system.
NO DISC
There is no disc in the disc slot.
There is no disc in the disc slot.
NO STEP
All of the programmed steps have been
erased.
All of the programmed steps have been
erased.
NOT IN USE
You have pressed a button that the
operation is not allowed or invalid at this
time.
You have pressed a button that the
operation is not allowed or invalid at this
time.
OFF TIME NG
The Play Timer or Recording Timer start
time and stop time is the same.
The Play Timer or Recording Timer start
time and stop time is the same.
PUSH SELECT
You tried to set the clock or timer during
timer operation.
You tried to set the clock or timer during
timer operation.
PUSH STOP
You tried to perform an operation that can
be performed only when the playback is
stopped.
You tried to perform an operation that can
be performed only when the playback is
stopped.
READING
The system is reading information of the
disc. Some buttons are not available.
SET CLOCK
You pressed CLOCK/TIMER SELECT
before the clock is set.
The system is reading information of the
disc. Some buttons are not available.
SET CLOCK
You pressed CLOCK/TIMER SELECT
before the clock is set.
SET TIMER
You pressed CLOCK/TIMER SELECT
before the Play Timer or Recording Timer
is set.
You pressed CLOCK/TIMER SELECT
before the Play Timer or Recording Timer
is set.
STEP FULL
You tried to program more than 25 steps.
You tried to program more than 25 steps.
UNLOCK
The disc theft-preventive function is
released.
The disc theft-preventive function is
released.