D-Link DAS-3224 Manual Do Utilizador

 
 

                                                                 

 

71 

IntCorrectionUP 

Sets the correction time for the upstream 
interleaved buffer. RS can also be disabled. 
Value:125us | 250us | 500us |1ms | 2ms | 
4ms | disable 

Preferred Standard 

Preferred standard compliance. Outcome is 
dependent 
upon standard support of the remote 
unit.GlobespanVirata High Speed ADSL DMT 
(ADSL+) applications only 
Value:    t1413 |gLite | gDmt | alctl14 
|multimode | adi | alctl 
|t1413Auto|adslPlus|GspanPlus 

Maximum Transmit Rate 

The maximum transmitting rate of ATU-C side 
or ATU-R side. 

Interleave Delay (ms) 

The value of Interleave Delay for this 
channel. 

UP Shift SNR (dB/10) 

Configured Signal/ Noise Margin for rate 
upshift. If the noise margin rises above this 
level, the modem should attempt to increase 
its transmit rate. In the case that RADSL is 
not present, the value will be 0. 

IntCorrectionDown 

This parameter sets the correction time for 
the downstream interleaved buffer. RS can 
also be disabled. 

Annex Type 

This parameter is set as per Annex 
compliance of the code release. 
GlobespanVirata High Speed ADSL DMT 
(ADSL+) applications only. 

Power attenuation 

The value in dB of Tx power attenuation   

 

  Alarm Profile Configuration 

If to configure Alarm Profile, proceed as follows. 

1. Double Click on “Alarm Profile Configuration” from the Function 

window. The Alarm Profile Configuration window appears.