KitchenAid 27" Double Wall Oven with Even-Heat™ True Convection Guia Da Instalação

1.  Decide on the final location for the oven. Avoid drilling 

or cutting into house wiring during installation.

2.  To avoid floor damage, set the oven onto cardboard prior 

to installation. Do not use handle or any portion of the front 

frame for lifting.

3.  Remove the shipping materials and tape from the oven. 

Remember to keep the corner posts and other materials 

that may be needed for installation.

4.  Remove the hardware package from inside the bag 

containing literature.

5.  Remove and set aside racks and other parts from 

inside the oven.

6.  Move oven and cardboard close to the oven’s final location.

IMPORTANT: Use 2 hands to remove oven door. For double 

ovens, repeat the process for each door.
1.  Prior to removing the oven door, prepare a surface where 

you will place it. This surface should be flat and covered 

with a soft blanket or use the corner posts from your 

packaging material.

2.  Open the oven door.
3.  Locate the oven door hinge locks in both corners of the 

oven door and rotate the hinge locks toward the oven door 

to the unlocked position. If the door hinge lock is not rotated 

fully (see illustration B), the door will not remove properly.

4.  Partially close the door to engage the door latch locks. 

The door will stop at this point.

5.  Using 2 hands, grasp the edges of the oven door. Lift and 

pull the oven door toward you and remove. You may need 

to gently shift door from side to side as you pull. 

6.  Set the oven door aside on the prepared covered work 

surface with the oven door resting on its handle.

7.  To continue with the oven installation, go to the “Positioning 

Oven Feet for Multiple Cabinet Cutout Heights” section.

1.  Using 2 hands, grasp side edges of door at the midpoint. 

Face the oven cavity.

2.  Locate the slots on each side of the oven front frame for 

the door hinge locks.