Canon XF305 Manual
Recording
100
3
Video Scopes
Video Scopes
The camcorder can display a simplified waveform monitor or
vectorscope. It can also display an edge monitor* to help you focus. The
video scopes appear only on the LCD screen. They do not appear in the
viewfinder or on an external monitor.
vectorscope. It can also display an edge monitor* to help you focus. The
video scopes appear only on the LCD screen. They do not appear in the
viewfinder or on an external monitor.
* The edge monitor looks at the focus of the entire picture and displays the results
as a waveform. The edge monitor is available only in
mode.
Displaying a Video Scope
Press the WFM button.
• The waveform monitor will appear in a window on the lower right of the
screen.
• You can repeatedly press the WFM button to activate the video scopes
in the following sequence.
Waveform monitor
→ Vectorscope → Edge monitor → Off
• Alternatively, you can display the video scopes using [J Other
Functions]
[WFM
(LCD)] [Setting]. Select [WFM] for the waveform
monitor, [VS] for the vectorscope or [Edge Mon.] for the edge monitor.
Configuring the Waveform Monitor
The camcorder’s waveform monitor function offers 5 modes. You can
also change the gain.
also change the gain.
1 Open the [Waveform Monitor] submenu.
[J Other Functions]
[WFM (LCD)]
[Waveform Monitor]
2 Select the desired option and then press SET.
• If you do not need to change the gain, you do not need to perform
steps 3 and 4.
3 Open the waveform monitor [Gain] submenu.
[J Other Functions]
[WFM (LCD)]
[Gain] (under [Waveform
Monitor])
4 Select [1x] or [2x] and then press SET.
Operating modes:
[J Other Functions]
[WFM (LCD)]
[Waveform Monitor]
[Line]