Canon XF305 Manual

Página de 213
Recording
98
3
Using Metadata
Using Metadata
The camcorder automatically adds metadata to clips while they are being 
recorded. Metadata consists of the user-defined user memo* and 
recording data, such as shutter speed, exposure and focus settings. You 
can use the Canon XF Utility software to check and search for specific 
metadata.
* The user memo contains the clip title (up to 100 characters), camera operator (up 
to 100 characters), location (up to 100 characters) and clip description (up to 
1,000 characters).
Setting a User Memo
Before you can add a user memo, you must first install the Canon XF 
Utility software (0 158). Next, create the user memo and then save it to 
an SD card. Once you insert the SD card in the camcorder and select the 
user memo, it will be added to clips you record.
For details on using the software, refer to the instruction manual that is 
installed with the Canon XF Utility software (0 161).
1 Use Canon XF Utility to save a user memo to an SD card.
• For details, refer to Managing User Memo Profiles in the Canon XF 
Utility Instruction Manual.
2 Insert the SD card into the SD card slot of the camcorder.
3 Open the [User Memo] submenu.
[J Other Functions] 
 [Set Metadata] 
 [User Memo]
4 Select the file name of the desired user memo and then press 
SET.
• The f icon appears on the right side of the screen.
• Select [Off] to record clips without a user memo.
NOTES
• You must set the user memo before you start recording for it to be 
added to the clip. You cannot change the user memo of a clip using the 
camcorder but you can do so with the Canon XF Utility software.
• You can also set a user-defined country code, organization code and 
user code for the metadata (0 179), which is based on the UMID 
standard. However, this information cannot be viewed using the Canon 
XF Utility software.
• After you set a user memo, do not remove the SD card while you are 
recording. If the SD card is removed, the user memo will not be added 
to the clip.
Operating modes:
[J Other Functions]
[
Set Metadata]
[User Memo]