Canon XF305 Manual

Página de 213
Recording
60
3
Adjusting the Focus
• When recording under dark conditions, the focusing range narrows and 
the picture may appear blurred.
• Autofocus may not work well on the following subjects or in the 
following cases. In such case, focus manually.
- Reflective surfaces
- Subjects with low contrast or without vertical lines
- Fast moving subjects
- Through dirty or wet windows
- Night  scenes
Detecting and Focusing On Faces
The camcorder can detect a person’s face during autofocus mode, 
automatically focus on it, and even track it if the person moves. When 
there are a number of people in the picture, one person (with the white 
face detection frame) will be determined to be the main subject and the 
camcorder will focus on that person’s face.
1 Open the [Face AF] submenu.
[l Camera Setup] 
 [AF Mode] 
 [Face AF]
2 Select [On] and then press SET.
3 Set an assignable button to [Select Face] (0 117).
4 Point the camcorder at the subject.
• If there is more than one person in the picture, the camcorder will 
automatically select one person it determines is the main subject. 
The camcorder will indicate the main subject with a white face 
detection frame and other faces with gray frames.
• To change the main subject when there is more than one person, 
press the assignable button set to [Select Face].
NOTES
• The camcorder may mistakenly detect the faces of non-human 
subjects. In such case, turn face detection off.
• In certain cases, faces may not be detected correctly. Typical examples 
include:
- Faces extremely small, large, dark or bright in relation to the overall 
picture.
- Faces that are turned to the side, at a diagonal or partially hidden.
• Face detection cannot be used in the following cases:
- When the shutter speed used is slower than 1/30 (1/24 if the frame 
rate is set to [24P]).
- When using slow & fast motion recording mode and the shooting 
frame rate is set to less than 24P.
- When [J Other Functions] 
 [Custom Function] 
 [Scan Reverse 
Rec] is set to [Both], [Vertical] or [Horizontal].
[l Camera Setup]
[AF Mode]
[Face AF]
[Off]