Canon XF305 Manual
61
Recording
3
Adjusting the Focus
• When a subject's face is detected, the camcorder adds an event
marker to that frame. You can then use the Canon XF Utility software
to search for event marks in a clip.
to search for event marks in a clip.
• If you set an assignable button to [Face AF] (0 117), you can press
the button to activate this autofocus mode.
Focus Limit and Macro Shooting
By default, the camcorder’s focus range allows macro shooting. You can
activate the focus limit to restrict the focus range. The focus range 2 cm
to f (at full wide-angle) is limited to 1 m to f (throughout the entire
zoom range).
activate the focus limit to restrict the focus range. The focus range 2 cm
to f (at full wide-angle) is limited to 1 m to f (throughout the entire
zoom range).
1 Open the [Focus Limit] submenu.
[l Camera Setup]
[Focus Limit]
2 Select [On] and then press SET.
• Select [Off] to enable macro shooting.
NOTES
• When the camcorder is in full manual focus mode, the focus limit will be
activated.
• If you set an assignable button to [Focus Limit] (0 117), you can press
the button to activate the focus limit.
[l Camera Setup]
[Focus Limit]
[Off]