Canon PowerShot SX600 HS Red Manual

Página de 163
31
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Moving the zoom lever will display the zoom bar (which indicates 
the zoom position). The color of the zoom bar will change depending 
on the zoom range.
White range: optical zoom range where the image will not appear 
grainy.
Yellow range: digital zoom range where the image is not noticeably 
grainy (ZoomPlus).
Blue range: digital zoom range where the image will appear grainy.
Because the blue range will not be available at some resolution 
settings (
), the maximum zoom factor can be achieved by 
following step 1.
4] tab ► [Digital 
Zoom] ► [Off].
Still Images
Movies
Using the Self-Timer
With the self-timer, you can include yourself in group photos or other timed 
shots. The camera will shoot about 10 seconds after you press the shutter 
button.
1
 Configure the setting.
z
z
Press the <
m> button, choose [ ] 
in the menu, and then choose the [
]] 
z
z
Once the setting is complete, [
]] is 
displayed.
2
 Shoot.
z
z
For Still Images: Press the shutter button 
halfway to focus on the subject, and then 
press it all the way down.
z
z
For Movies: Press the movie button.
z
z
Once you start the self-timer, the lamp 
will blink and the camera will play a self-
timer sound.
z
z
Two seconds before the shot, the blinking 
and sound will speed up. (The lamp will 
remain lit in case the flash fires.)
z
z
To cancel shooting after you have 
triggered the self-timer, press the 
<
n> button.
z
z
To restore the original setting, choose 
[ ] in step 1.
Still Images
Movies
Using the Self-Timer to Avoid Camera Shake
This option delays shutter release until about two seconds after you have 
pressed the shutter button. If the camera is unsteady while you are pressing 
the shutter button, it will not affect your shot.
z
z
Follow step 1 in “Using the Self-Timer” 
(
[].
z
z
Once the setting is complete, [
[] is 
displayed.
z
z
Follow step 2 in “Using the Self-Timer” 
(