Netgear R7500v2 - Nighthawk Dual Band Gigabit Wireless Router - 802.11ac Manual Do Utilizador

If you changed the LAN IP address of the router, you are disconnected when this change takes effect.

To reconnect, close your browser, relaunch it, and log in to the router

By default, the router acts as a Dynamic Host Configuration Protocol (DHCP) server. The router assigns
IP, DNS server, and default gateway addresses to all computers connected to the LAN. The assigned
default gateway address is the LAN address of the router.

These addresses must be part of the same IP address subnet as the router’s LAN IP address. Using the
default addressing scheme, define a range between 192.168.1.2 and 192.168.1.254, although you can
save part of the range for devices with fixed addresses.

Launch a web browser from a computer or wireless device that is connected to the network.

Type http://www.routerlogin.net.

A login window opens.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and password are
case-sensitive.

The BASIC Home page displays.

Select ADVANCED > Setup > LAN Setup.

Your router might display information that is different from this example.

Make sure that the Use Router as DHCP Server check box is selected.

Specify the range of IP addresses that the router assigns:
a. In the Starting IP Address field, type the lowest number in the range.