Netgear R7500v2 - Nighthawk Dual Band Gigabit Wireless Router - 802.11ac Manual Do Utilizador

This IP address must be in the same subnet as the router.

b. In the Ending IP Address field, type the number at the end of the range of IP addresses.

This IP address must be in the same subnet as the router.

Click the Apply button.

Your settings are saved.

The router delivers the following parameters to any LAN device that requests DHCP:

An IP address from the range that you define

Subnet mask

Gateway IP address (the router’s LAN IP address)

DNS server IP address (the router’s LAN IP address)

By default, the router acts as a DHCP server. The router assigns IP, DNS server, and default gateway
addresses to all computers connected to the LAN. The assigned default gateway address is the LAN
address of the router.

You can use another device on your network as the DHCP server or specify the network settings of all
your computers.

To disable the DHCP server feature in the router:

Launch a web browser from a computer or wireless device that is connected to the network.

Type http://www.routerlogin.net .

A login window opens.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and password are
case-sensitive.

The BASIC Home page displays.

Select ADVANCED > Setup > LAN Setup.

The LAN Setup page displays.

Clear the Use Router as DHCP Server check box.

Click the Apply button.