Netgear R7500v2 - Nighthawk Dual Band Gigabit Wireless Router - 802.11ac Manual Do Utilizador
The service is now in the Portmap Table. You must enable port triggering before the router uses port
triggering. See
triggering. See
on page 168.
Enable Port Triggering
To enable port triggering:
1.
Launch a web browser from a computer or wireless device that is connected to the network.
2.
Type http://www.routerlogin.net .
A login window opens.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
The Port Forwarding/Port Triggering page displays.
5.
Select the Port Triggering radio button.
6.
Clear the Disable Port Triggering check box.
If this check box is selected, the router does not use port triggering even if you specified port triggering
settings.
settings.
7.
In the Port Triggering Timeout field, enter a value up to 9999 minutes.
This value controls how long the inbound ports stay open when the router detects no activity. This
value is required because the router cannot detect when the application terminates.
value is required because the router cannot detect when the application terminates.
8.
Click the Apply button.
Specify Internet Port Settings
168